17-4PH / SUS630 Bar Stainless Steel
| DIN | ASTM | AISI | UNS | JIS | Liyane |
| 1.4542 | |||||
| X5CrNiCuNb16-4 | Kelas 630 | 630 | S17400 | SUS 630 | 17-4PH |
| AMS 5643 | |||||
| AMS 5622 | |||||
| Z6CNU17-04 | |||||
| 10705GU-GV |
Komposisi Kimia (%)
| C | Si | Mbak | P | S | Cr | Ni | Mo | Liyane |
|---|---|---|---|---|---|---|---|---|
| 0,07 | 1.00 | 1.00 | 0,040 | ≤ 0,030 | 15.0 ～ 17.0 | 3.00 ～ 5.00 | - | Cu 3.00 ～ 5.00 Nb + Ta 0,15 ～ 0,45 |
Properti Mekanik
| Kahanan perawatan panas | Tensil Rm (MPa) | Ngasilake Rp0.2 (MPa) | Elongasi A (%) | Pangurangan ing salib bagean ing fraktur Z (%) | Pengaruh AKV / AKU (J) | Brinell Atose (HBW) |
|---|---|---|---|---|---|---|
| Annealed | 1034 | 650 | 6.0 ～ 15.0 | 30.0 ～ 60.0 | - | ≤ 363 |
| H900 | 1380 | 1275 | ≥ 14.0 | ≥ 50.0 | 20 | ≤ 420 |
| H925 | 1310 | ≥ 1200 | ≥ 14.0 | ≥ 54.0 | ≥ 34 | ≤ 409 |
| H1025 | ≥ 1170 | ≥ 1140 | ≥ 15.0 | ≥ 56.0 | 47 | ≤ 352 |
| H1075 | ≥ 1140 | 1035 | ≥ 16.0 | ≥ 58.0 | ≥ 61 | ≤ 341 |
| H1100 | 1035 | ≥ 930 | ≥ 17.0 | ≥ 58.0 | ≥ 61 | ≤ 332 |
| H1150 | ≥ 1000 | 860 | ≥ 19.0 | ≥ 60,0 | 68 | 311 |
| H1150 + H1150 | ≥ 965 | ≥ 760 | ≥ 20.0 | ≥ 60,0 | ≥ 108 | 302 |
| H1150M | 860 | 585 | 22.0 | ≥ 68.0 | ≥ 135 | 277 |
Forms and Shapes:
Bar bunder (Diameter): 5,5 mm nganti 700 mm
Rod kawat (Diameter): 0.10 ~ 16mm
Bar persegi / Bar datar: 5mm nganti 550mm
Strip baja liwat kadhemen: T0.1 - 3mm X W5 - 650mm XL (utawa ing bentuk koil)
Dering palsu: OD200 ~ 1500mm X ID150 ~ 1250mm X H20 ~ 1250mm
Piring abot / tengah liwat panas sing digulung: T50 - 200mm X W80- 1200mm X L1000-3000mm
Potongan penempaan: poros jumangkah nganggo tutup / disk / tabung / slug / donat / kubus / bentuk liyane sing beda adhedhasar OEM.
Dawane: Dawa tetep utawa dawa acak utawa adhedhasar sarat khusus pelanggan.
