301 304 304H 30408 347H 30403 304L 304N 304LN S30408 SUS304 316 316L 316Ti 31603 316H koil stainless steel
Produk koil stainless steel 301 303 304 321 316L 309S 310S digunakake kanggo bagean stamping logam, bagean peralatan mekanik gedhe, lan sasis. Lan aksesoris elektronik cilik, macem-macem suku cadang perangkat keras. Koil stainless steel 301 303 304 321 316L 309S 310S nduweni resistensi asam, resistensi alkali, kekuatan tarik lan kekuatan panen. Luwih cocog kanggo polesan, ora ana blister ing lumahing, pinhole lan liya-liyane. Uga duwe resistensi anti-sensitisasi sing kuat kanggo suhu dhuwur.
| Sasmita | 301 304 304H 30408 347H 30403 304L 304N 304LN S30408 SUS304 316 316L 316Ti 31603 316H koil stainless steel |
| Proses | Panas digulung utawa Cold kadhemen |
| Perawatan lumahing | No.1 / 2B / No.4 / HL / Disikat / BA / 8K Mirror / Embossed / Etched etc. (Kanthi kertas Kertu utawa PVC kanggo nglindhungi) |
| Standar | JIS, AISI, ASTM, GB, DIN, EN, lsp. |
| Kandel | Digulung adhem (0.3-3mm). Panas digulung (3-100mm) |
| Jembar | 600-2000mm utawa kaya sing disesuaikan |
| Merek | TISCO, BAO STEEL, BAOXIN, ZPSS, LISCO, JISCO, lsp. |
| Paket | Paket koil asli nganggo palet kayu ekspor |
| Bayaran |
|
| Baris pangolahan | Pemrosesan garis rambut / lapisan warna PVD / pemrosesan embossing / pemrosesan terukir / Pemrosesan cermin Super / garis geser / garis pemotong / garis pemotongan laser / garis stamping / garis las / garis tikungan |
Kisaran toleransi kekandelan saka kumparan baja tahan karat BAOSTEEL 301 304 321 316L 309S 310S
| Rentang toleransi kekandelan koil stainless steel 301 304 321 316L 309S 310S | ||||
| Kandel | Toleransi Gedhe | Toleransi Normal | Toleransi Cilik | Ora Toleransi |
| 0,4MM | 0.3-0.32 | 0.33-0.37 | 0.37-0.39 | ≥0.39 |
| 0,5MM | 0.4-0.42 | 0.43-0.47 | 0.47-0.49 | ≥0,49 |
| 0,6MM | 0.5-0.52 | 0.53-0.56 | 0.57-0.59 | ≥0.59 |
| 0,7MM | 0.6-0.62 | 0.63-0.67 | 0.67-0.69 | ≥0.69 |
| 0,8MM | 0.7-0.72 | 0.73-0.77 | 0.74-0.79 | ≥0,79 |
| 0.9MM | 0.8-0.82 | 0.83-0.87 | 0.87-0.89 | ≥0,89 |
| 1.0MM | 0.89-0.9 | 0.91-0.94 | 0.94-0.99 | ≥0,99 |
| 1.2MM | 1.02-1.08 | 1.09-1.15 | 1.16-1.18 | 1.18 |
| 1,5MM | 1.32-1.38 | 1.39-1.45 | 1.46-1.48 | ≥1.48 |
| 2.0MM | 1.72-1.79 | 1.8-1.86 | 1.87-1.9 | ≥1.9 |
| 2,5MM | 2.23-2.36 | 2.32-2.42 | 2.42-2.47 | ≥2,48 |
| 3.0MM | 2.7-2.77 | 2.78-2.85 | 2.85-2.9 | ≥2.9 |
| Rentang toleransi kekandelan koil stainless steel 301 304 321 316L 309S 310S | ||||
| Kandel | Toleransi Gedhe | Toleransi Normal | Toleransi Cilik | Ora Toleransi |
| 3.0MM | 2.6-2.75 | 2.75-2.85 | 2.86-2.9 | ≥2.9 |
| 4.0MM | 3.5-3.6 | 3.6-3.75 | 3.76-3.95 | ≥3.95 |
| 5.0MM | 4.5-4.6 | 4.6-4.75 | 4.75-4.95 | ≥4,95 |
| 6.0MM | 5.4-5.6 | 5.6-5.75 | 5.75-5.85 | ≥5,85 |
| 8.0MM | 7.3-7.5 | 7.5-7.65 | 7.65-7.85 | ≥7.85 |
| 10.0MM | 9.2-9.3 | 9.3-9.6 | 9.6-9.85 | ≥9.85 |
| 12.0MM | 11.1-11.2 | 11.2-11.6 | 11.6-11.85 | ≥11.85 |
| 14.0MM | 13.1-13.2 | 13.2-13.6 | 13.6-13.85 | ≥13.85 |
Komposisi Kimia lan sifat mekanik:
| ASTM | C% | Mn% | P% | S% | Si% | Cr% | Ni% | Mo% |
201 | ≤0.15 | 5.5-7.5 | 0.06 | ≤0.03 | ≤1.00 | 16.0-18.0 | 3.5-5.5 | - |
202 | ≤0.15 | 7.5-10.0 | 0.06 | ≤0.03 | ≤1.00 | 17.0-19.0 | 4.0-6.0 | - |
301 | ≤0.15 | ≤2.00 | 0.045 | ≤0.03 | ≤1.00 | 16.0-18.0 | 6.0-8.0 | - |
304 | 0.08 | ≤2.00 | 0.045 | ≤0.03 | ≤0.75 | 18.0-20.0 | 8.0-10.5 | - |
304L | ≤0.03 | ≤2.00 | 0.045 | ≤0.03 | ≤0.75 | 18.0-20.0 | 8.0-12.0 | - |
309S | 0.08 | ≤2.00 | 0.045 | ≤0.03 | ≤0.75 | 22.0-24.0 | 12.0-15.0 | - |
310S | 0.08 | ≤2.00 | 0.045 | ≤0.03 | ≤1.50 | 24.0-26.0 | 19.0-22.0 | - |
316 | 0.08 | ≤2.00 | 0.045 | ≤0.03 | ≤0.75 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 |
316L | ≤0.03 | ≤2.00 | 0.045 | ≤0.03 | ≤0.75 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 |
317L | ≤0.03 | ≤2.00 | 0.045 | ≤0.03 | ≤0.75 | 18.0-20.0 | 11.0-15.0 | 3.0-4.0 |
321 | 0.08 | ≤2.00 | 0.045 | ≤0.03 | ≤0.75 | 17.0-19.0 | 9.0-12.0 | - |
347 | 0.08 | ≤2.00 | 0.045 | ≤0.03 | ≤0.75 | 17.0-19.0 | 9.0-13.0 | - |
405 | 0.08 | ≤1.00 | 0.04 | ≤0.03 | ≤1.00 | 11.5-14.5 | ≤0,60 | - |
409 | 0.08 | ≤1.00 | 0.045 | ≤0.03 | ≤1.00 | 10.5-11.75 | ≤0,50 | - |
430 | ≤0.12 | ≤1.00 | 0.040 | ≤0.03 | ≤0.75 | 16.0-18.0 | ≤0,60 | - |
434 | ≤0.12 | ≤1.00 | 0.040 | ≤0.03 | ≤1.00 | 16.0-18.0 | - | - |
444 | 0.025 | ≤1.00 | 0.045 | ≤0.03 | ≤1.00 | 17.5-19.5 | ≤1.00 | - |
403 | ≤0.15 | 5.5-7.5 | 0.04 | ≤0.03 | ≤0,50 | 11.5-13.0 | ≤0,60 | - |
410 | ≤0.15 | ≤1.00 | 0.035 | ≤0.03 | ≤1.00 | 11.5-13.5 | ≤0,60 | ≤1.00 |
420 | 0.16~0.25 | ≤1.00 | 0.04 | ≤0.03 | ≤1.00 | 12.0-14.0 | ≤0.75 | ≤1.00 |
440A | 0.60~0.75 | ≤1.00 | 0.04 | ≤0.03 | ≤1.00 | 16.0-18.0 | - | ≤0.75 |
SAD2507 | ≤0.03 | ≤1.2 | 0.035 | 0.02 | ≤0,80 | 24.0-26.0 | 6.0-8.0 | 3.0-5.0 |
SAF2205 | ≤0.03 | ≤2.0 | ≤0.03 | 0.02 | ≤1.00 | 21.0-23.0 | 4.0-6.5 | 2.5-3.5 |
904L | ≤0.0.3 | ≤2.0 | 0.035 | ≤0.03 | ≤1.00 | 18.0-20.0 | 23.0-25.0 | 3.0- |
